Advertise | Subscribe | Contact Us | Connect with us    
 

Getting Started: Electric Starters Fresno CA

We now have the standard starter used in automobiles around the world today. Over the years, size, shape, voltage ratings and control methods have changed. In spite of those changes, the starter operation and design has remained overall the same for nearly a century.

Triple A Automotive
(559) 321-7103
906 Barstow
Clovis, CA
Blackstone Brake & Auto Repair
(559) 264-7863
1558 N Effie Street%2C %23 102
Fresno, CA
D & R Automotive of Fresno Inc
(559) 266-6060
901 M Street
Fresno, CA
Rick's Tire & Service
(559) 485-7970, 001-2004
1501 Fulton Street
Fresno, CA
Brownie Muffler Service
(559) 237-2081
3316 E Ventura Avenue
Fresno, CA
Belmont Tire & Automotive
(559) 485-8970
1449 E Belmont Avenue
Fresno, CA
Cars
(559) 485-7296
2229 E McKinley Avenue
Fresno, CA
Goodguys Tire Center
(559) 221-1438
4140 N Blackstone Avenue
Fresno, CA
A & J Auto Repair
(559) 222-3912
4323 N Blackstone Avenue %23 B
Fresno, CA
Goodguys Tire Center
(559) 237-9383
2530 N Weber Avenue
Fresno, CA
Data Provided by:
 
Provided By: 

Getting Started: Electric Starters

It's no secret that the first automobiles were started by hand cranking. It's also pretty obvious that, somewhere along the way, someone replaced the hand crank with an electric motor. In 1911, a friend of Henry Leland, founder of Cadillac, died from injuries sustained while restarting a car for a lady. The need for a starting method that did not risk personal injury became obvious to Leland. He commissioned Charles Kettering, head of Dayton Electrical Company (Delco today), to come up with a better method. That better method developed was the electric starter motor. By 1912, electric starters were standard on all Cadillacs.

The "Bendix" on the starter has a bit of it's own history as well. It was named after Vincent Bendix who designed and patented it in 1910.

Between Kettering's electric starter in 1912 and Vincent Bendix's starter drive, we now have the standard starter used in automobiles around the world today. Over the years, size, shape, voltage ratings and control methods have changed. In spite of those changes, the starter operation and design has remained overall the same for nearly a century.

Construction & Operation
A lot has to happen before the "start" signal from the ignition switch can reach the starter assembly. The ignition switch simply sent a voltage signal through the safety switch to the starter solenoid. Some of these systems used a starter relay, and some did not. In the modern starting systems, the PCM is now key to the operation. The sta...

Click here to read the rest of the article at Tire Review